|
Spoiler FAQ's
Back to Manufacturer Catalog
1. Can I get a spoiler for my car like the factory makes?
Depending on what type of car you own, there is a good chance you can. Most of the spoilers we distribute are factory replicas, so you cannot tell the difference between ours and theirs. If there is no factory style spoiler for your car, a custom or universal spoiler may be the answer.
2. Can I get a painted spoiler for an older car?
Yes! Our manufacturers painting facility is the largest in Northeast Ohio, and it is set up to paint spoilers in factory colors as far back as 1991, in many cases. You provide us with the color name and color code located on your car, and we handle the rest.
3. Will the paint job on the spoiler match my car?
We guarantee that each painted spoiler will match the factory paint color. Our manufacturers computerized mixing platform generates paint formulas to match factory colors for all manufacturers. However, cars may fade with age. Therefore, a very slight difference in color may occur. (In fact, if you look at your car very closely, you may notice that different parts of your car may have slight variations in color, assuming your car still has the factory paint. For example, the driver's door may not be the exact same color as the trunk. This is normal.)
4. Can I install the spoiler myself, or do I need the help of a professional?
All the spoilers we handle are ready for do-it-yourself installation. We provide you with easy-to-follow instructions indicating everything you need to know for a fast, efficient installation. It's as simple as: (1) measure a few distances on the trunk lid; (2) place the spoiler on the trunk and outline the mounting feet; (3) remove the spoiler and place a template (provided) on your outline, then drill down through the spots indicated; (4) peel the paper liner from mounting pads and stick the spoiler on your outline; (5) open the trunk and drill up into the metal plate in the mounting feet; (6) install your mounting screws with lock washers and tighten firmly. (Detailed instructions for your specific make and model are included in the box.)
5. How do I install my spoiler worry-free?
Our easy-to-follow directions combined with the templates and double-sided adhesive pads mean an easy installation without stress.
6. What kind of tools do I need to install a spoiler?
All you need are three common tools; (1) a tape measure to locate your installation area; (2) a small hand-held drill (rechargeable is fine) with accompanying drill bits; (3) a socket wrench to tighten down your mounting screws.
7. Do you have a warranty?
All of our spoilers (by DEi) carry a five (5) years or 50,000 miles warranty that covers any manufacturing or painting defects. Our manufacturers has been in the automotive business for nearly 30 years, so we have the experience to provide you with solutions to any possible problems.
8. How much does the typical spoiler weigh?
Most of our spoilers weigh between three and ten pounds.
9. What is the difference between a genuine SportWing spoiler and the foam-filled wings sold by many other companies?
Our fiberglass spoilers are lightweight, yet they are sturdier than most foam-filled wings sold by other companies. Our fiberglass spoilers are not as susceptible to defects, such as splitting or bubbling. When you buy a SportWing spoiler, you are assured that it will be durable enough to last - we guarantee it.
|
WARRANTY INFORMATION
Our manufacturer guarantees their spoiler products for five (5) years or 50,000 miles, whichever comes first, on defects in material or workmanship.
The warranty also includes the finish on all painted parts, including spoilers, as long as the part has not been repainted.
This warranty shall not apply to any defect or failure caused by damage in transit, off-highway use, abuse, accident, neglect, parts that have been altered or repainted, vandalism, fire or smoke damage, act of war, severe weather storms, flooding, stones or gravel, scratches from keys or other foreign objects, or parts that have been installed incorrectly. Warranty is not transferable. Customer must provide proof of purchase such as the invoice date and number; plus the part number, description and color when requesting a return for warranty consideration. When dealing with a warranty claim, CustomPartsPlus and our manufacturer (Dawn Enterprises) will, at their option, replace non-sellable merchandise or refund the purchase price. The company will not be responsible for any claims beyond the replacement value on non-sellable merchandise. All of our products are sold with the understanding that the buyer has independently determined the suitablilty of such product to installation. If the merchandise is installed by the customer with the prior knowledge that it is defective, the warranty is void.
This website is provided by Padgett & Associates, Inc. DBA CustomPartsPlus. All rights reserved.
-----------------------------------------------------------------------------------------------------------------------
Padgett & Associates, Inc. DBA CustomPartsPlus - Hudson, OH 44236
Powered by PremierSiteCreator.com
|
